⚡️Hello screen Bypass A12/A13 (NO SIGNAL) iPhones& iPads ⚡️
⚡️Passcode/ Disabled screen Bypass A12/A13 (WITH SIGNAL) iPhones& iPads ⚡️

& 💯
✅iCloud Login
✅Reboot
✅App Store
✅Apple Pay
✅FaceTime
✅Notifications
✅OTA & Reset Block

🚀Supported Models🚀

– iPhone XS
– iPhone XS Max
– iPhone XR
– iPhone 11
– iPhone 11 Pro
– iPhone 11 Pro Max
– iPhone SE (2nd generation)
– iPad Air (3rd generation)
– iPad mini (5th generation)
– iPad (8th generation)
– iPad (9th generation)

Hello Screen Setup (A12/A13)

Requirements

* USB MODULE for usbliter8
( Waveshare RP2350 USB-A / Waveshare RP2350 Zero / Pimoroni TINY2350 / Raspberry Pi Pico 2 )

* Device with the latest supported iOS version.
* Replacement Serial number: HW0523D2Z3A with Ihello HFZ

Procedure,

1. Connect the device to the tool and start the Hello service.
2. The tool will automatically reboot the device into Recovery Mode and begin the DFU process.
3. The tool will display the required serial number for Registration: (Send SN to your Favourite HFZ reseller or our HFZ Admin)
4. Launch USBLITER8 and use the Diagnostic function to install the new serial number.
5. Once the serial number has been written, return to the tool and start the Hello service again.
6. Wait for the activation process to complete. It usually takes around 1 minute and 30 seconds.
7. After the device reboot & already activated, click the Hello service one more time to complete the final configuration.
8. The tool will finish the process by applying the OTA Skip and Erase configuration.